DW744-XE/387486-01 5/1/02 3:44 PM Page 5

Safety Instructions

When using power tools, always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. Read the following safety instructions before attempting to operate this product. Keep these instructions in a safe place!

General

1Keep work area clean. Cluttered areas and benches can cause accidents.

2Consider work area environment. Do not expose power tools to high humidity or rain. Keep work area well lit. Do not use power tools in the presence of flammable liquids or gases.

3Guard against electric shock. Prevent body contact with earthed surfaces (e.g. pipes, radiators, cookers and refrigerators).

4Keep children away. Do not let children come into contact with the tool or extension cord. Keep all people away from the work area.

5Extension cords for outdoor use. When the tool is used outdoors, always use extension cords intended for outdoor use and marked accordingly.

6Store idle tools. When not in use, power tools must be stored in a dry place and locked up securely, out of reach of children.

7Dress properly. Do not wear loose clothing or jewellery. They can be caught in moving parts. Preferably wear rubber gloves and non-slip footwear when working outdoors. Wear protective hair covering to keep long hair out of the way.

8Wear safety goggles. Also use a face or dust mask in case the operations produce dust or flying particles.

9Be aware of maximum sound pressure. Take appropriate measures for the protection of hearing if the sound pressure of 85dB(A) is exceeded.

10Secure workpiece. Use clamps or a vice to hold the workpiece. It is safer and it frees both hands to operate the tool.

11Do not overreach. Keep proper footing and balance at all times.

12Avoid unintentional starting. Do not carry the plugged-in tool with a finger on the switch. Be sure that the switch is released when plugging in.

13Stay alert. Watch what you are doing. Use common sense. Do not operate the tool when you are tired.

14Disconnect tool. Shut off power and wait for the tool to come to a complete standstill before leaving it unattended. Unplug the tool when not in use, before servicing or changing accessories.

15Remove adjusting keys and wrenches. Always check that adjusting keys and wrenches are removed from the tool before operating the tool.

16Use appropriate tool. Do not force small tools or attachments to do the job of a heavy-duty tool. The tool will do the job better and safer at the rate for which it is intended. The use of any accessories or attachments other than the ones recommended in this instruction manual may induce a risk of personal injury.

17Do not abuse cord. Never carry the tool by its cord or pull it to disconnect from the socket. Keep the cord away from heat, oil and sharp edges.

18Maintain tools with care. Keep tools in good condition and clean for better and safer performance. Follow the instructions for maintenance and changing accessories. Inspect tool cords at regular intervals and, if damaged, have them repaired by an authorised DEWALT Repair Agent. Inspect extension cords periodically and replace them if damaged. Keep all controls dry, clean and free from oil and grease.

19Check damaged parts. Before using the tool, carefully check it for damage to ensure it will operate properly and perform its intended function. Check for misalignment and seizure of moving parts, breakage of parts and any other conditions that may affect its operation. Have damaged guards or other defective parts repaired or replaced as instructed. Do not use the tool if the switch is defective. Have the switch replaced by an authorised DEWALT Repair Centre.

20Have your tool repaired by an authorised DEWALT Repair Centre. This power tool is in accordance with the relevant safety regulations. To avoid danger, electric appliances must only be repaired by qualified technicians.

1

Page 5
Image 5
DeWalt DW744XRS instruction manual Safety Instructions

DW744X, DW744XRS specifications

The DeWalt DW744XRS and DW744X are two highly regarded portable table saws designed for both professional contractors and dedicated DIY enthusiasts. These robust tools combine power, versatility, and advanced features, making them ideal for a range of woodworking projects.

One of the standout features of the DW744XRS is its 15-amp motor, delivering a no-load speed of 3,850 RPM. This powerful motor provides ample cutting capacity for various materials, ensuring that users can tackle even the most demanding tasks with ease. The DW744X, while similar in many respects, also boasts a durable 15-amp motor, making both saws capable of handling heavy-duty applications.

Both models are equipped with a patented Rack and Pinion telescoping fence system, which allows for smooth, accurate adjustments. This feature simplifies the process of measuring and adjusting cuts by ensuring that the fence remains parallel to the blade, enhancing overall precision. The fence can be easily adjusted from 18 inches to 24 inches, supporting a wider range of cutting applications.

Safety is a significant concern for DeWalt, and both the DW744XRS and DW744X come with an onboard smart guard system that includes a blade guard, anti-kickback pawls, and a riving knife. This system not only enhances user safety but also improves cutting efficiency by minimizing blade binding and kickback.

Portability is another key attribute of both models. The DW744XRS includes a rolling stand, making it easy to transport to job sites or storage locations. The stand can be set up quickly and features a wide stance for added stability during operation. The DW744X, while lacking the rolling stand, remains lightweight and easily transportable due to its compact design.

Additional features include a 24-tooth carbide blade that delivers clean, smooth cuts, and an adjustable depth of cut up to 2.5 inches at 90 degrees. The blade height can be adjusted quickly, ensuring versatility for various types of cuts, including crosscuts and rip cuts.

Overall, the DeWalt DW744XRS and DW744X table saws offer a perfect blend of power, safety, and ease of use. Whether you are working on a large construction project or tackling detailed woodworking tasks at home, these saws provide reliable performance and high precision, making them an excellent investment for any woodworking enthusiast.