DW756,758/385498 8/20/01 7:43 AM Page 1

and changing accessories. Inspect tool cords periodically and if damaged, have repaired by authorized service facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease.

DISCONNECT OR LOCK OFF TOOLS when not in use, before servicing, and when changing accessories, such as blades, bits, cutters.

REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.

AVOID UNINTENTIONAL STARTING. Don’t carry tool with finger on switch. Be sure switch is off when plugging in.

EXTENSION CORDS. Use only 3-wire extension cords that have 3-prong grounding-type plugs and 3-pole receptacles that accept the tool’s plug. Replace or repair damaged cords. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

 

 

 

Minimum Gage for Cord Sets

 

 

Volts

 

Total Length of Cord in Feet

 

 

120V

 

0-25

26-50

51-100

101-150

 

240V

 

0-50

51-100

101-200

201-300

 

Ampere Rating

 

AWG

 

 

 

More

Not more

 

 

 

 

Than

Than

 

 

 

 

0

-

6

18

16

16

14

6

-

10

18

16

14

12

10

-

12

16

16

14

12

12

-

16

14

12

Not Recommended

 

 

 

 

 

 

 

 

OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords intended for use outdoors and so marked.

STAY ALERT. Watch what you are doing. Use common sense. Do not operate tool when you are tired.

CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this instruction manual. Have defective switches replaced by authorized service center. Do not use tool if switch does not turn it on and off.

Additional Safety Instructions for Grinders

ALWAYS USE GUARDS AND EYE SHIELDS. WHEN GRIN- DING, ALWAYS KEEP GUARDS IN PLACE.

Use only grinding wheels having a maximum operating speed at least high as “No Load RPM” marked on the tool’s nameplate.

Before using, inspect recommended accessory for cracks or flaws. If such a crack or flaw is evident, discard the accessory. DO NOT USE A GRINDING WHEEL THAT IS CRACKED OR FLAWED IN ANY WAY.

When starting the tool, let it run for one minute. Never start the tool with a person in line with the wheel. This includes the operator.

Do not grind on the sides of grinding wheels unless they are specifically designed for that purpose.

Do not overtighten wheel clamp nut. This may crack the grinding wheel.

Clean the cavity around the grinding wheel periodically.

CAUTION: Some wood contains preservatives such as copper chromium arsenate (CCA) which can be toxic. When sanding these materials extra care should be taken to avoid inhalation and minimize skin contact.

English

1

Page 4
Image 4
DeWalt DW756 manual Additional Safety Instructions for Grinders

DW756 specifications

DeWalt is renowned for producing high-quality tools, and two of their standout products in the bench grinder category are the DW758 and DW756. These models epitomize durability and performance, making them ideal for both professional and home use.

The DeWalt DW758 is a powerful 8-inch bench grinder that operates at a robust 3,600 RPM, providing exceptional grinding capabilities. This model features a heavy-duty motor designed for a range of applications, including metal shaping, sharpening, and polishing. Its high-performance motor ensures consistent power delivery and enables users to work on tough materials with ease.

One of the primary characteristics of the DW758 is its cast iron base, which enhances stability during operation. This design not only minimizes vibrations but also prolongs the lifespan of the grinder. The grinder comes equipped with two 8-inch grinding wheels, permitting users to perform a variety of tasks without needing multiple tools. The included 36-grit and 60-grit wheels support different grinding applications, allowing for both coarse and fine finishes.

On the other hand, the DeWalt DW756 is an equally compelling option, featuring a slightly smaller design while still retaining impressive power. The DW756 operates at a speed of 3,450 RPM, making it suitable for handling general grindings tasks. Like its counterpart, this model also features a rugged cast iron base for stability and reduced vibration, ensuring a smoother grinding experience.

Both grinders utilize high-quality components such as the precision-machined shaft and balancing wheels, which contribute to their accuracy and efficiency. Additionally, the adjustable tool rests on both models allow users to customize their setups for optimal comfort and control. Safety features, including eye shields and toggle switches, are also standard, providing an added layer of protection for users.

In terms of versatility, both models are designed to accommodate a variety of accessories, making them adaptable to different tasks. With their robust build, powerful motors, and user-friendly features, the DeWalt DW758 and DW756 are excellent choices for anyone looking to enhance their workshop with reliable bench grinders. Whether for professional use or hobbyist projects, these grinders excel in performance, making them invaluable tools for achieving precise results.