EN G L I S H

current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3)PERSONAL SAFETY

a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b)Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c)Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f)Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g)If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4)POWER TOOL USE AND CARE

a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any

adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits etc., in accordance with these instructions taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5)SERVICE

a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

ADDITIONAL SPECIFIC SAFETY RULES

Safety Instructions for All Operations

a)This power tool is intended to function as a grinder. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

b)Operations such as sanding, wire brushing, polishing and cutting-off are not recommended to be performed with this power tool. Operations for which the power tool was not designed may create a hazard and cause personal injury.

c)Do not use accessories which are not specifically designed and recommended by the tool manufacturer. Just because the accessory can be attached to your power tool, it does not assure safe operation.

4

Page 5 Page 7
Page 6
Image 6
DeWalt DW820 manual Additional Specific Safety Rules, Safety Instructions for All Operations
Page 5 Page 7

DW820 specifications

The DeWalt DW820 is a high-performance electric screwdriver designed for both professional tradespeople and DIY enthusiasts. Known for its robust construction and user-friendly features, this tool has become a staple in workshops and job sites around the world.

One of the standout characteristics of the DW820 is its powerful motor, capable of delivering consistent torque and speed. The high-performance motor enables the tool to handle a wide range of fastening tasks, from driving screws into wood to tackling tougher materials like metal and masonry. With a speed range up to 2,500 RPM, the DW820 ensures efficiency and precision in every application.

The DW820 also features an adjustable torque control mechanism, allowing users to set the torque according to the requirements of their specific task. This makes it particularly useful for delicate applications where over-tightening could lead to material damage. The ability to adjust torque not only enhances performance but also increases the longevity of both the tool and the fasteners being used.

Another highlight of the DeWalt DW820 is its ergonomic design. The tool is constructed with a rubber grip handle, providing comfort during prolonged use and reducing fatigue. The compact and lightweight design further enhances maneuverability, making it easier to operate in tight spaces or overhead situations.

Additionally, the DW820 incorporates a keyless chuck, allowing for quick and easy bit changes. This feature saves time and increases efficiency, especially in fast-paced work environments. The integrated LED light is another valuable addition, illuminating the work area for improved visibility, particularly in low-light conditions.

The construction quality of the DW820 is impressive, featuring durable materials that withstand the rigors of daily use. The tool's housing is designed to resist wear and tear, ensuring it remains reliable even in the harshest conditions.

In summary, the DeWalt DW820 electric screwdriver combines power, precision, and user-friendly features. With its high-performance motor, adjustable torque control, ergonomic design, and practical features such as a keyless chuck and LED light, it meets the demands of both professional and hobbyist users alike. Whether you’re assembling furniture, installing fixtures, or working on construction projects, the DW820 stands out as a versatile and dependable tool in any toolkit.
Top Page Image Contents