•Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from mov- ing parts. Loose clothing, jewelry, or long hair can be caught in moving parts. Air vents often cover moving parts and should also be avoided.
•Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.
•Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.
•Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.
•Use safety equipment. Always wear eye protection. Dust mask,
TOOL USE AND CARE
• Use clamps or other practical way to secure and support the |
workpiece to a stable platform. Holding the work by hand or |
against your body is unstable and may lead to loss of control. |
• Do not force tool. Use the correct tool for your application. The |
correct tool will do the job better and safer at the rate for which it is |
designed. |
• Do not use tool if switch does not turn it on or off. Any tool that |
cannot be controlled with the switch is dangerous and must be |
repaired. |
• Disconnect the plug from the power source before making any |
adjustments, changing accessories, or storing the tool. Such |
preventative safety measures reduce the risk of starting the tool |
accidentally. |
• Store idle tools out of reach of children and other untrained |
•Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges are less likely to bind and are easier to control.
•Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.
•Use only accessories that are recommended by the manufac- turer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool.
SERVICE
•Tool service must be performed only by qualified repair per- sonnel. Service or maintenance performed by unqualified person- nel could result in a risk of injury.
•When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow maintenance instruc- tions may create a risk of electric shock or injury.
ADDITIONAL SPECIFIC SAFETY INSTRUCTIONS FOR GRINDERS
• Always use proper guard with grinding wheel. A guard protects operator from broken wheel fragments and wheel contact. Do not use Type 1 abrasive or diamond wheels without proper guarding.
• Accessories must be rated for at least the speed recom- mended on the tool warning label. Wheels and other acces- sories running over rated speed can fly apart and cause injury. Accessory ratings are above rated
• Do not use type 11 (flaring cup) wheels on this tool. Using inap- propriate accessories can result in injury.
• Hold the tool by insulated gripping surfaces when performing
English
persons. Tools are dangerous in the hands of untrained users. |
1
an operation where the cutting tool may contact hidden wiring
