INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVOANTES

 

 

 

 

 

 

If you have questions or comments, contact us. Pour toute question ou tout commentaire, nous contacter. Si tiene dudas o comentarios, contáctenos.

1-800-4-DEWALT • www.dewalt.com

 

DE USAR EL PRODUCTO.

 

 

 

 

DWD210G, DWD215G, DWD220 Heavy-Duty 1/2" (13 mm) Drill Perceuse industrielle 13 mm (1/2 po) Taladro industrial de 13 mm (1/2 pulg.)

 

INSTRUCTION MANUAL

GUIDE D’UTILISATION MANUAL DE INSTRUCCIONES

 

 

 

 

 

 

 

 

 

 

 

DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 (FEB10)

Part No. N072471

DWD210G, DWD215G, DWD220

Copyright © 2008, 2010 DEWALT

The following are trademarks for one or more DEWALT power tools: the yellow and black color scheme; the “D” shaped air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

NOTICE: indicates a practice not related to personal injury which, if not avoided, may result in property damage.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT(1-800-433-9258)

WARNING: To reduce the risk of injury, read the instruction manual.

General Power Tool Safety Warnings

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTURE REFERENCE

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1)WORK AREA SAFETY

a)Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b)Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c)Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2)ELECTRICAL SAFETY

a)Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b)Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c)Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d)Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e)When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f)If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.

3)PERSONAL SAFETY

a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b)Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c)Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f)Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g)If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust- related hazards.

4)POWER TOOL USE AND CARE

a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits etc., in accordance with these instructions taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5)SERVICE

a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Additional Safety Rules

Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.

Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.

Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.

ALWAYS use the side handle supplied with the tool. Tighten the side handle securely before use. Keep a firm grip on the tool at all times. Do not attempt to operate this tool without holding it with both hands. Operating this tool with one hand will result in loss of control. Breaking through may be hazardous as well.

Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

Keep handles dry, clean, free from oil and grease. It is recommended to use rubber gloves. This will enable better control.

Air vents often cover moving parts and should be avoided. Loose clothes, jewellery or long hair can be caught in moving parts.

An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The smaller the gauge number of the wire, the greater the capacity of the cable, that is 16 gauge has more capacity than 18 gauge. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

Minimum Gauge for Cord Sets

 

 

Volts

Total Length of Cord in Feet (meters)

Ampere Rating

120V

25 (7.6)

50 (15.2)

100 (30.5)

150 (45.7)

 

 

240V

50 (15.2)

100 (30.5)

200 (61.0)

300 (91.4)

More

Not More

 

 

AWG

 

 

Than

Than

 

 

 

 

 

0

6

 

18

16

16

14

6

10

 

18

16

14

12

10

12

 

16

16

14

12

12

16

 

14

12

Not Recommended

WARNING: Always use eye protection. All users and bystanders must wear eye protection that conforms to ANSI Z87.1.

WARNING: Always wear proper personal hearing protection that conforms to ANSI S12.6 (S3.19) during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.

WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:

ANSI Z87.1 eye protection (CAN/CSA Z94.3),

ANSI S12.6 (S3.19) hearing protection,

NIOSH/OSHA/MSHA respiratory protection.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

lead from lead-based paints,

crystalline silica from bricks and cement and other masonry products, and

arsenic and chromium from chemically-treated lumber (CCA).

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disburse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.

The label on your tool may include the following symbols. The symbols and their definitions

are as follows:

 

 

 

 

 

 

V

volts

A

amperes

Hz

hertz

W

watts

min

minutes

 

 

 

....................

alternating current

 

 

 

 

direct current

 

 

 

 

alternating or direct current

 

 

 

..................

no

 

 

 

 

Class I Construction

no load speed

 

 

 

 

 

 

......................

 

 

 

 

(grounded)

 

 

 

 

earthing terminal

 

 

 

 

 

 

 

 

..........................

 

 

 

 

 

 

.....................

 

 

......................

Class II Construction

 

 

 

.....................

safety alert symbol

..........................

 

 

 

(double insulated)

BPM

beats per minute

…/min

per minute

RPM

revolutions per minute

Page 1
Image 1
DeWalt DWD220, DWD210GR instruction manual Definitions Safety Guidelines, General Power Tool Safety Warnings

DWD210GR, DWD210G, DWD220 specifications

The DeWalt DWD220, DWD210G, and DWD210GR are powerful drills designed to meet the needs of both professionals and DIY enthusiasts. These models stand out in the crowded market of industrial tools, each offering unique features and technologies that enhance performance and versatility.

The DeWalt DWD220 is a heavy-duty 1/2-inch motor drill characterized by its robust power and reliability. Equipped with a 10-amp motor, it delivers a high torque output that makes it suitable for various drilling applications including wood, metal, and masonry. One of the standout features of the DWD220 is its two-speed gearbox, allowing users to choose between high and low-speed settings for optimal drilling performance depending on the material. Additionally, it features a lock-on button for continuous operation, reducing the strain on the user's hand during prolonged use.

Moving on to the DWD210G, this model also boasts a powerful 10-amp motor. What sets the DWD210G apart is its integrated high-performance motor which provides a more efficient power transfer. This drill is designed for heavy-duty applications, and its variable speed trigger allows for greater control over the drilling process. The DWD210G is particularly noted for its soft-grip handle providing added comfort during use, which is critical when working on extended projects.

Lastly, the DWD210GR is a slightly modified version that introduces a keyless chuck feature, making bit changes easier and faster. This drill retains the strong 10-amp motor and the two-speed settings of its counterparts, ensuring high torque and versatility. The keyless chuck allows for quick and efficient swapping of drill bits, which is immensely beneficial for users who require rapid changes while working. Additionally, the DWD210GR also has an ergonomic design that contributes to less user fatigue and enhanced handling.

All three models are built to endure heavy use, reinforced with high-quality materials and smart design choices that enhance durability. Furthermore, each drill includes an integrated safety system that protects the tool from overheating, ensuring longevity and reliability. With their emphasis on power, comfort, and user-friendly features, the DeWalt DWD220, DWD210G, and DWD210GR stand out as superior choices for anyone looking for high-performance drills that meet tough demands. Whether you are a contractor on a job site or a hobbyist in a home garage, these drills offer the right balance of power, control, and innovation.