ENGLISH
Safety Warnings Specific for Polishing Operations
a)Do not allow any loose portion of the polishing bonnet or its attachment strings to spin freely. Tuck away or trim any loose attachment strings. Loose and spinning attachment strings can entangle your fingers or snag on the workpiece.
Safety Warnings Specific for Wire Brushing Operations
a)Be aware that wire bristles are thrown by the brush even during ordinary operation. Do not overstress the wires by applying excessive load to the brush. The wire bristles can easily penetrate light clothing and/or skin.
b)If the use of a guard is recommended for wire brushing, do not allow any interference of the wire wheel or brush with the guard. Wire wheel or brush may expand in diameter due to work and centrifugal forces.
–Risk of personal injury due to prolonged use.
–Risk of dust from hazardous substances.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
DATE CODE POSITION (FIG. 1)
The date code (p), which also includes the year of manufacture, is printed into the housing.
Example:
2012 XX XX
Year of Manufacture
Additional Safety Rules for Grinders
•Threaded mounting of accessories must match the grinder spindle thread. For accessories mounted by flanges, the arbor hole of the accessory must fit the locating diameter of the flange. Accessories that do not match the mounting hardware of the power tool will run out of balance, vibrate excessively and may cause loss of control.
•The grinding surface of the centre depressed wheels must be mounted below the plane of the guard lip. An improperly mounted wheel that projects through the plane of the guard lip cannot be adequately protected.
•Do not use Type 11 (flaring cup) wheels on this tool. Using inappropriate accessories can result in injury.
•Always use side handle. Tighten the handle securely. The side handle should always be used to maintain control of the tool at all times.
Residual Risks
In spite of the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These are:
–Impairment of hearing.
–Risk of personal injury due to flying particles.
–Risk of burns due to accessories becoming hot during operation.
Package Contents
The package contains:
1Angle grinder
1Guard
1Side handle
1Flange set
1Wrench
1Instruction manual
1Exploded drawing
•Check for damage to the tool, parts or accessories which may have occurred during transport.
•Take the time to thoroughly read and understand this manual prior to operation.
Description (fig. 1)
WARNING: Never modify the power tool or any part of it. Damage or personal injury could result.
a.Spindle lock button
b.Spindle
c.Side handle
d.Backing flange
e.Threaded clamp nut
f.Guard
g.Slider switch (DWE4050)
7
