Using the appropriate grinder, wheel and dust extractor vacuum it can be used to remove the vast majority of static and airborne dust which without the use of the tuckpoint shroud could otherwise contaminate the working environment or pose an increased health risk to the operator and those in close proximity.
DO NOT use under wet conditions or in presence of flammable liquids or gases.
The tuckpoint shroud is a professional tool. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.
Recommended power tools to be used with this attachment are available at extra cost from your local dealer or authorized service center. If you need assistance in locating any power tool, please contact DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call
FIG. 1 | F |
|
ASSEMBLY AND ADJUSTMENT (FIG. 1, 2)
WARNING: To reduce the risk of injury, ALWAYS turn off the tool and disconnect the tool from the power source before making any adjustments or removing or installing attachments or accessories. This applies to both the grinder and the dust extractor vacuum. Such preventative safety measures reduce the risk of starting the tool accidentally.
Mounting and Removing Tuckpoint Shroud
NOTE: The tuckpoint shroud is only recommended for use with the DWE46102
1.Follow the mounting and removing guard instructions in the tool manual to remove the guard from grinder (DWE46102).
2.Open the clamp lever (G) on the tuckpoint shroud and align the tabs (I) on the tuckpoint shroud with the slots (J) on the grinder gear case.
FIG. 2
English
G | I |
E |
A | J |
G |
GB
B | 3. With the clamp lever open, rotate the shroud into the desired |
| |
D | working position. The shroud should be positioned between the |
spindle and the operator to provide optimum efficiency. | |
C |
|
5
