DeWalt DWE7480 instruction manual Features Fig, For Future USE, Specifications, Unpacking

WARNING: Use of this tool can generate and/or disburse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body. Always operate tool in well-ventilated area and provide for proper dust removal. Use dust collection system wherever possible.

FEATURES (Fig. 3)

Examine Figure 3 to become familiar with the saw and its various parts. The following sections on assembly and adjustments will refer to these terms and you must know what and where the parts are.

SAVE THESE INSTRUCTIONS

FOR FUTURE USE

Specifications

Amperes	15 A
Miter Angle	60° L and R
Bevel Angle	-2° to 45° L
Blade Size	10" (254 mm)
Max. Cut Depth	0° Bevel	3-1/8" (79 mm)
Max. Cut Depth	45° Bevel	2-1/4" (57 mm)
RPM, no load	4800

Unpacking

WARNING: To reduce the risk of injury, DO NOT connect the machine to the power source until the table saw is completely assembled and you read the entire instruction manual.

Open the box and slide the saw out, as shown in Figure 1. Carefully unpack the table saw and all loose items from the carton. Examine all parts to make sure that parts have not been damaged during shipping. If any parts are missing or damaged, contact your dealer to replace them before attempting to assemble the tool.

Refer to Figure 2 for the loose items and hardware included with the saw:

1.Rip fence

2.Arbor wrench and spindle wrench (attached to saw base)

3.Blade guard assembly

4.Miter gauge

5.Push stick (attached to rip fence)

WARNING: To reduce the risk of serious personal injury, have push stick ready to use before starting cut.

FIG. 1 FIG. 2

FIG. 3

Q

A

P

O

M

R

U

W

V

CB

KN

D

D	L	E
		G

F

H

I

N

J

G

S

T

English

5