M. Splitter
N. Anti-kickback assembly O. Dust collection port
P. Guard dust collection port Q. Throat plate
R. Rip fence
S. Rip fence latch
T. Work support/narrrow rip fence (shown in stored position)
U. Blade wrenches (stored position)
V. Push stick (stored position)
W. Riving knife (non thru sawing) (FIG. 27)

English

WARNING: Use of this tool can generate and/or disperse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.

SAVE THESE INSTRUCTIONS FOR FUTURE USE Specifications

Amperes

15 A

Table Size

21-7/8" (556 mm) X 26-3/8" (669 mm)

Miter Angle

30° L&R

Bevel Angle

0° to 45°L

Blade Size

10" (254 mm)

Max. Cut Depth, 0° Bevel

3-1/8" (79 mm)

Max. Cut Depth, 45° Bevel

2-1/4" (57 mm)

RPM, no load

4800

Unpacking (Fig. 1)

WARNING: To reduce the risk of injury,

FIG. 1

 

DO NOT connect the machine to the

 

power source until the table saw is

 

completely assembled and you have read

 

the entire instruction manual.

 

Open the box and slide the saw out, as

 

shown in Figure 1.

 

Carefully unpack the table saw and all

 

loose items from the carton. Examine all

 

parts to make sure that parts have not

 

been damaged during shipping. If any parts

 

are missing or damaged, contact your

 

dealer to replace them before attempting

 

to assemble the tool.

 

FEATURES (Fig. 2, 3)

WARNING: Never modify the power tool or any part of it. Damage or personal injury could result.

Examine Figures 2 and 3 to become familiar with the saw and its various parts. The following sections on assembly and adjustments will refer to these terms and you must know what and where the parts are.

A. Table

B. Blade

C. Rip scale indicator D. Fine adjust knob E. Rail lock lever

F. Blade height adjustment wheel G. Bevel lock lever

FIG. 2

K

 

Q

A

 

L

J

C

FIG. 3

V

T

S

T

R

S

E

D

G F

H

P

B

M

N

U

O

I

H. ON/OFF switch I. Mounting holes J. Miter gauge

K. Blade guard assembly

L. Riving knife/blade guard release lever

INTENDED USE

This table saw is designed for professional ripping, crosscutting, mitering, beveling and non thru-cutting applications, such as dadoing, with various materials.

DO NOT use for cutting metal, cement board, or masonry.

DO NOT use under wet conditions or in presence of flammable liquids or gases.

DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.

4

Page 5 Page 7
Page 6
Image 6
DeWalt DWE7490X Save These Instructions for Future USE Specifications, Unpacking Fig, Features, Amperes 15 a Table Size
Page 5 Page 7

DWE7490X specifications

The DeWalt DWE7490X is a powerful and versatile job site table saw, designed for professionals and serious DIY enthusiasts alike. This table saw combines high performance with a range of features and technologies that make it an essential tool for a variety of woodworking projects.

At the heart of the DWE7490X is its robust 15-amp motor, which delivers an impressive 4800 RPM. This level of power ensures that users can easily cut through hardwoods and other dense materials without bogging the saw down. The saw's 10-inch blade provides optimal cutting capacity, making it efficient for a wide range of applications. One of its standout features is the rack and pinion fence system, which ensures accurate, smooth adjustments. The fence can be easily adjusted to various widths, allowing for precise cuts and increased productivity.

Another key characteristic of the DWE7490X is its patented portable design. The saw features a foldable stand that allows for easy setup and transport. Weighing just 90 pounds, it is lightweight enough for most users to move around construction sites without hassle. This portability is complemented by its onboard storage, which securely holds accessories such as the push stick, rip fence, and miter gauge when not in use.

In terms of safety, the DWE7490X is equipped with a blade guard and anti-kickback pawls, which help protect users by preventing unexpected accidents during operation. Additionally, the saw's large on/off switch is designed for easy operation, even with gloves on.

The DWE7490X also includes a versatile dust collection system that connects to a shop vacuum for improved cleanup. This helps maintain a cleaner work environment and enhances visibility while cutting.

With a cutting depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees, users can count on the DWE7490X to handle a wide variety of woodworking tasks with ease. The combination of power, portability, and precision makes the DeWalt DWE7490X an outstanding tool for anyone serious about their woodworking projects. Whether tackling large sheets of plywood or intricate cuts in hard materials, this table saw is designed to perform.
Top Page Image Contents