DeWalt PLEBR10 manual Using the PowerLine Configuration Utility, Overview, Setup Wizard

PowerLine Ethernet Bridge

Chapter 5: Using the PowerLine Configuration Utility

Overview

After installing the Bridge, you will run the Setup Wizard to install the PowerLine Configuration Utility. Use this utility to check the PC’s direct connection to the powerline network, search for powerline devices on your network, and set up security using a network password.

Note: If you want the devices on your powerline network to share high-speed Internet access, connect the Bridge to a router after you run the PowerLine Configuration Utility. Refer to “Chapter 5: Connecting the PowerLine Ethernet Bridge.”

Setup Wizard

1.After the installation of the Bridge is complete, the Main Menu screen will appear. Click Setup to run the Setup Wizard.

You can also click User Guide to view this User Guide, click LINKSYS Web to link to the Linksys website, www.linksys.com, or Exit to exit this utility.

Figure 5-1: Main Menu

2. When the Stop screen appears, click the Next button. You already have connected the Bridge.

Figure 5-2: Stop

Chapter 5: Using the PowerLine Configuration Utility 7

Overview