Diamond Audio Technology D3 Series specifications Specifications, Power And Speaker Connections

All connections and controls for the D3 Amplifiers are located on the end panels.

Plated connections ensure excellent conductivity and good looks. Easy to understand controls make setting the amplifier up correctly an easy task.

SPECIFICATIONS

	D3 400.2	D3 400.4
4 Ohm Stereo Output	132w@1%THD	57w@1%THD
2 Ohm Stereo Output	210w@1%THD	88w@1%THD
4 Ohm Mono Output	420w@1%THD	182w@1%THD
Frequency Response	20Hz~20KHz	20Hz~20KHz
Signal-to-Noise Ratio	>100dB	>100dB
THD	.05%	.05%
Input Sensitivity	250mV~2.5V	250mV~2.5V
High Level Input Sensitivity	500mV~5V	500mV~5V
Power Supply Operating Range	10.8V~15.6V	10.8V~15.6V
Dimensions	2 1/4" H x 8 1/2" W x 12" L	2 1/4" H x 8 1/2" W x 13" L

POWER AND SPEAKER CONNECTIONS

The following figures show the power/output end panels for each amplifier along with a key to show the layout of each amp.

Fig.1 D3 400.2 1 2 3 4 5 6

1.Left Speaker Output	4.Ground lnput
2.Right Front Speaker Output	5.Battery+12v lnput
3.Remote turn-on lnput	6.40 Amp Fuse

Fig.2	D3 400.4
	1	2	3	4	5	6
	7	8
	1.Left Front Speaker Output				5.Battery+12v lnput

2.Right Front Speaker Output	6.40 Amp Fuse
3.Remote Turn-on lnput	7.Left Rear Speaker Output
4.Ground lnput	8.Right Reart Speaker Output

2