Dicota Stream manual Setup the Mouse, Safety notice, For PS/2 mouse port installation

Safety notice:

1.This product complies with IEC 60825-1, class 1 laser product.

2.This product complies with FCC and CE rules.

3.This product has no serviceable parts. Use of controls or adjustments of procedures other than the user guide mentiones may result in mal- function or dangerous.

SETUP the Mouse

The mouse is connected to your computer via the USB cable. It needs to be plugged in to your Notebook or PC by a USB port or a mouse port.

For PS/2 mouse port installation

Please turn off your computer before installing your mouse. Plugging and unplugging cables to your computer’s mouse port while the computer is running can damage the mouse port or your computer.

For USB port installation

Windows 98 (or higher) is required for USB port installation. Connect the receiver cable to the USB port on the computer. For Windows, you may be prompted to insert the Windows software CD.

PS2 Mouse Port

USB Port

Insert the Windows driver CD into the computer’s CD-ROM drive when asked to do so. Follow the instructions steps.

CAUTION:

Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

3