ADTRAN 1 manual

Technical Support 1-888-4ADTRAN (1-888-423-8726)

Configuring the

Total Access 900 Series

Quick Configuration Guide 61210916L1-42.4B March 2006

The DSX-1 interface is located on the rear of the Total Access 900 Series products. It is labeled

DSX-1 T1 0/1 on the ADSL units and DSX-1 T1 0/2 on all other units. The DSX-1 interface allows

DS0s to be provided to customer’s voice terminating equipment such as a PBX.

1. Start a VT100 terminal session to connect to your unit. If you need assistance, follow the

steps in the Total Access 900 Series Quick Configuration Guide (P/N 61210916L1-42.1).

2. Enter enable at the initial command prompt to access the Enable mode’s priviledged

commands.

3. Enter configure terminal to access the Global Configuration mode.

4. At the (config)# prompt, enter interface t1 0/x to access the interface configuration mode for

the DSX-1 interface.

5. Enter description 12 Network to PBX to provide a text description of the channels provided

to the DSX-1 interface.

6. Enter tdm-group 2 timeslots 1-12 to create a TDM group of timeslots 1 through 12 on the

DSX-1 interface (t1 0/x).

7. Enter no shutdown to activate the interface.

8. Enter exit to return to the Global Configuration mode.

Please note that these examples are given for your study and consideration only.

They are to help you reach a better understanding of the fundamental concepts

before configuring your application. It will be necessary for you to modify these

examples to match your network configuration. Please replace all underlined entries

(example) with your specific parameters.

Please refer to the ADTRAN Operating System (AOS) Command Reference

Guide on your ADTRAN OS Documentation CD for detailed information on

individual commands and subcommands pertaining to the Total Access 900 Series

products.

The following steps demonstrate configuring the DSX-1 connection. In the following steps,

please substitute 1 (ADSL units) or 2 (all other units) for x in t1 0/x.