XM Satellite Radio XDNX1V1KC manual Configuring Your onyX, A234B456, To display the Radio ID

Configuring Your onyX

Radio ID

Your onyX has an alphanumeric ID which uniquely identifies the radio.. This ID is used during the activation process..

Find Available FM Channels in Your Area

Before attempting any of the procedures below, you should park your vehicle in a safe location.. Do not attempt to set up your FM channels or any onyX function while driving..

To display the Radio ID:

1Press menu..

2Radio ID will be highlighted.. If it is not highlighted, press to scroll to and highlight Radio ID.. Press the Select button.. The Radio ID will be displayed..

3Press and hold menu to return to the main display screen..

Radio ID

Your Radio ID is:

A234B456

PowerConnect allows you to listen to XM audio through your vehicle’s FM radio.. You will first need to find an available FM channel, which is a channel that is not being used by an FM radio station in your area.. When you tune your FM radio to an available channel, you should only hear static or silence

– not talk or music..

Once you have found an available channel, you need to tune onyX’s built-in transmitter to the same channel to receive XM sound through your vehicle’s radio..

To find an available FM channel:

•Manually tune through your local FM channels

Manually tune through your local FM channels on your vehicle’s FM radio.. Turn on your vehicle’s FM radio.. Start at 88..1 and use the ‘Manual’ tune function on your vehicle’s FM radio to tune through each FM channel one-by-one (88..1 followed by 88..3 etc..) to locate channels that aren’t being used by a local FM radio station.. Write down each FM channel that has only static or silence on it, until you reach 107..9.. Once you have created your list of available FM channels, you will need to find the one that provides the best match for onyX..

Tune onyX to a favourite XM channel (or to channel 1, if it’s not yet

78 79