Vehicle Installation
windshield, route the cable out of the windshield molding and into the rubber weather stripping around the door opening.. Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping.. Run the cable inside of the weather stripping
Step 5: Connect the Magnetic Mount Antenna and PowerConnect Power Adapter
to the bottom of the door opening..
4.Pull the cable out of the weather stripping at the bottom of the door opening and route it under the carpet toward the dashboard.. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls.. Secure the excess cable with wire ties..
5.Bring the end of the cable out at the PowerConnect Vehicle Dock location.. Leave yourself enough cable so you can easily connect it to the antenna connector of the dock..
6.Continue with “Step 5: Connect the Magnetic Mount Antenna and PowerConnect Power Adapter” on page 37..
1Plug the Magnetic Mount Antenna
into the silver ANT connector on the PowerConnect Vehicle Dock..
2Insert the PowerConnect Power Adapter
into your vehicle’s cigarette lighter or power adapter socket..
3Plug the PowerConnect Power Adapter into the red PWR connector
on the dock..
AUDIO | ANT | PWR | FM OUT |
AUDIO | ANT | PWR | FM OUT |
36 | 37 |
