Digi MIL-S3120, MIL-S3130 manual Technical Information

Output Voltage Power consumption

You can try to correct the interference by one or more of the following measures:

!Plug the computer which has the equipment installed into a different power outlet so that the equipment and the receiver are on different branch circuits.

SAFETY INSTRUTIONS

1.This product should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

2.This product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the grounding type plug.

3.Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.

!Reorient the receiving radio or TV antenna where this may be done safely.

!If necessary, you should consult the place of purchase or an experienced radio/television technician for additional suggestions.

4.If an extension cord is used with this product, make sure that the total ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating. Also make sure that the total of all products plugged into the wall outlet does not exceed 15 amperes.

5.Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

6.Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to servicing to service personnel’s.

TECHNICAL INFORMATION

Standards Compatibility

ISO/IEC 802.2-3

IEEE 802.3

IEEE 802.3u

Interfaces

RJ-45 fully shielded connector for 10Base-T and 100Base-TX Fast Ethernet

Physical

8-port 10/100 Dual Speed Switch

Width	219mm (8.62 in.)
Height	26mm (1.02 in.)
Depth	101mm (3.98 in.)
Weight	0.8 kg (1.76 lb.)
4-port 10/100 Dual Speed Switch
Width	158mm (6.22 in.)
Height	26mm (1.02 in.)
Depth	101mm (3.98 in.)
Weight	0.6 kg (1.32 lb.)

8-port 10/100 Dual Speed Switch

Input Voltage	120 VAC @ 60Hz
	or 230 VAC @ 50Hz
Output Voltage	12VDC @ 1.2A
Power consumption	11.2 W

4-port 10/100 Dual Speed Switch

Input Voltage 120VAC @ 60Hz or 230VAC @ 50Hz 12VDC @ 1.2A 8W

Environmental Specifications

Operating temperature	0° to 40° C
Storage temperature	-20° to 70° C
Operating Humidity	10% to 90% RH
Storage Humidity	10% to 95% RH

Electromagnetic Emission

FCC Class A, CE Class A, VCCI Class A

Safety Approval

UL/CUL, TUV

5