TransPort® WR44 Installation Guide
Page 10
TransPort® WR44 Installation Guide
Page 11
2.4 Under Unit Features

TransPort WR44

[Front of Unit]
1
2
3
1
[Rear of Unit]

TransPort WR44 R

[Front of Unit][Rear of Unit]
3

1. Unit mounting holes.

2. SIM slot cover plate mounting hole.

3. Reset button - The reset button allows the user to return the unit to its factory default settings. It is recessed

[to avoid accidental reset], and can be accessed via a small 2.5mm hole located on the underside of the

unit.

2.4.1  Reset instructions

Step 1) Turn the unit on and wait 15 seconds for the unit to complete its initialization process.

Step 2) Press and hold the reset button gently for 5 seconds. After this time, the unit will automatically

re-boot and display a pattern of alternating LEDs ashing followed by the normal boot sequence.

Note: Do not remove power from the unit during this operation as corruption of the ash memory may occur.

2.5 Additional Hardware Features

The TransPort WR44 is available with various hardware options, as shown below:

WWAN PRIMARY WIFI SECONDARY
11-58VDC
1.3A MAX
MAIN AUX.
WIFI PRIMARYWWAN SECONDARY
LAN3 LAN2 LAN1 LAN0
SERIAL 0
Option 1: ASY Serial Port (3x)
Option 3: GPS
Option 5: Telemetry 1 I/O Interface
Option 10: DialServ
Option 9: ISDN-U/PSTN
SERIAL 1 SERIAL 3
SERIAL 2
Option 2: SYN/ASYN Serial Port
Option 4: ISDN
GPS
Option 6: Telemetry 2 I/O Interface
A B A B +_
DC IN RLY IN OUT 1 OUT 2 OUT 3
+_+_+_
OUT 4
Option 7: Fleet I/O Interface Option 8: PSTN
Pwr Data GPS
ISDN
Modem
ISDN
A B A B A B ABD1 D2 D3 D4
AN1 AN2 AN3 AN4 D12C D34C
PSTN
To Modem
SERIAL 1