Digi XEB09-BCS manual Advanced Operation, Technical Specifications

Advanced Operation

Contact Digi Support if your application requires:

•Over 16 SUs per AP for roaming/mobility applications

•Multiple APs that use the same network key for roaming/mobility

•Low packet loss rates when using broadcast or multicast Ethernet packets.

Note: If possible, fixed IP addresses are recommended on your network. This is because broadcast and multicast packets (e.g., DHCP, UDP) are sent once and may experience losses at extended range.

Unicast packets (e.g., HTTP, TCP) are sent using advanced error correction and retransmission techniques to ensure delivery.

Technical Specifications

Characteristic	Specification/Description
RF transmission rate	1.536 Mbps
Aggregate Throughput	935 Kbps
Output power	+21dBm
Receive sensitivity	-97dBm at lOe-4 BER
Ethernet Interface	RJ45 10BaseT, Auto MDI/MDIX
Radio channels	12 Non-overlapping
Automatic frequency select	Yes - radio channel automatically selected
	and adaptively optimized
Manual frequency select	Yes
Status LEDs	Power, RF TX, RF RX, Ethernet Link,
	6/Channel and 6/Link Quality
Error correction technique	Sub-block error detection and retransmission
Adjacent-band rejection	SAW receiver filter attenuates cellular and
	pager interference.
Regulator type	XEB09-BCS uses Linear Regulator and XEB09-
	BIS uses Switching Regulator
Power consumption	Transmit: XEB09-BCS 2W XEB09-BIS 1.5W
	Receive:XEB09-BCS 1.2W XEB09-BIS 1.0W
Voltage	XEB09-BCS: 5-7 VDC
	XEB09-BIS: 9-48 VDC Power over Ethernet
Temperature range	-40˚C to 70˚C (-40˚F to 158˚F)
Current draw	XEB09-BCS:
	350 mA
	XEB09-BIS:
	150mA at 9VDC
	110mA at 12VDC
	32mA at 48VDC
Radio Size	XEB09-BCS: 5.5 in (14.0 cm) x 3.4 in (8.5
	cm) x 1.2 in (3.0 cm)
	XEB09-BIS: 7.9 in (20.0 cm) x 3.2 in (8.0
	cm) x 2.1 in (5.5 cm)
Regulatory Approvals	FCC ID (U.S. - Part 15.247) R4N-AW900M, IC
	ID (Canada) 5303A-AW900M

5