Digicom manual Adsl/Hdsl, Michelangelo Gateway, Description, Code 8E4088

IS SUBJECT TO CHANGE WITHOUT NOTICE. All other brands, products and trademarks are property of their respective owners.

Michelangelo Gateway

DESCRIPTION

Share the ADSL high rate with all the computers of

your LAN.

Michelangelo Gateway is the ideal solution to surf the Internet with all the computers of your office using a single Internet account and saving up the cost of the Internet service over ADSL.

Easy to install, you can set it up using a common browser.

It has a 10BaseT (WAN) Ethernet port to be connected to the ADSL modem and 1 10/100 Fast Ethernet port for the LAN connection.

Michelangelo Gateway has several advanced functions for a network efficient and optimized management:

DHCP server for the automatic assignment of IP addresses, NAT Router for the account sharing, PPPoE (PPP over Ethernet) for ADSL connection (or direct connection to the ISP), Security Groups, Access Control, Virtual Servers and Exposed Computer.

It complies with any platform supporting TCP/IP protocol.

Code: 8E4088

λRJ45 10/100 Mbps Autosensing LAN port

λ10 Mbps WAN port

λ4 Leds: LAN Link, LAN Activity, WAN Link, WAN ActivityλWeb based configuration via BrowserλTCP/IP and DHCP Server Support

λPPPoE RFC 2516 Support

λNAT, NAT Exports, Exposed Computer SupportλVirtual Servers, Security Groups, Access Control Support

ADSL/HDSL

THIS DOCUMENT

The maximum performance with the latest xDSL technologies up to 8 Mbps. Solutions for point-to-point (HSDL) and Internet (ADSL) applications.

For further information: international@digicom.it or http://www.digicom.it

Michelangelo Gateway 14.09.2001