Miller Electric Essential Guide to Oil Change, Oil Filter, and Maintenance for Welding Systems

. A complete Parts List is available at www.MillerWelds.com

9-4. Changing Engine Oil, Oil Filter, and Fuel Filter (Kohler-Powered Units)

! Stop engine and let cool. 1 Oil Drain Valve

2 1/2 ID x 7 in Hose

3 Oil Filter

Change engine oil and filter accord- ing to engine owner’s manual.

	! Close valve and valve cap
Full	before adding oil and
	running engine.

Fill crankcase with new oil to full mark on dipstick (see Section 5-3).

4 Fuel Filter

5 Fuel Line

Replace line if cracked or worn. Install new filter. Wipe up any spilled fuel.

Start engine, and check for fuel leaks.

!

4

Stop engine, tighten connec- tions as necessary, and wipe up fuel.

5

3

2

1

Tools Needed:

803 847-C / S-0842

OM-4434 Page 42