Miller Electric Bobcat 225 Close valve and valve cap, Before adding oil, Running engine, Oil Fill

. A complete Parts List is available at www.MillerWelds.com

8-5. Changing Engine Oil, Oil Filter, and Fuel Filter (Robin-Powered Units)

Oil Check

Full

	!	Stop engine and let cool.
	1	Oil Drain Valve
	2	1/2 ID x 7 in Hose
	3	Oil Filter
	Change engine oil and filter accord-
	ing to engine owner’s manual.
	!	Close valve and valve cap
		before adding oil and
		running engine.
Oil Fill	Fill crankcase with new oil to full
	mark on dipstick (see Section 5-2).
	4	Fuel Filter
	5	Fuel Line
	Replace line if cracked or worn.
	Install new filter. Wipe up any spilled
	fuel.
	Start engine, and check for fuel
	leaks.
	!	Stop engine, tighten connec-
		tions as necessary, and wipe
		up fuel.

4

5

3

2

1

Tools Needed:

803 848-C / 802 921-A / S-0842

OM-4434 Page 36