Digicom SNT06/1 dimensions Data Communication, Isdn modem, U Ppo, Technical Features

	T
	N .
	D .
S		A
I

	T		R	N
N		E			E
					T
I

PPP

S		T
	R
	UPPO

THIS DOCUMENT IS SUBEJCT

TO CHANGE WITHOUT NOTICE

Data Communication

SNT06/1

Isdn modem

digicom’s SNT06/1, pure ISDN modem, offers the connectivity on ISDN network in order to transmit data from any data processor or personal computer with serial interface in synchronous or asynchronous mode. It seems a modem with one serial port in V24/V28 and V35; the same design and the same features are available in PC card version SNT13 and in a PCMCIA standard format called CCI05.

By using together SNT06 and CCI05 or any other digicom’s ISDN product it is possible to exploit V120 protocol which,together with V42bis data compression, allows to increase the performances of a single communication channel B up to speeds of 115,2 Kbit per second (about 11500 ASCII characters transmitted in one second). In fact not evereybody knows that with V110 protocol (which is implemented too) it is possible to communicate in asynchronous mode on ISDN up to a speed of 38400 bps. This is limitative if compared to the real ISDN potentiality which is used at 64 Kbit and whose cost does not depend on speed.

In case of your access server is PPP/SLIP based, you can use the integrated PPP support on SNT06; this is normally used in Internet/Intranet or private IP network with Cisco or compatible router and SNT06, like all digicom ISDN products, is ready to communicate in this environment.

SNT06 is used as a modem, it supports AT command, it is easy to install and it doesn’t need any particular software on ISDN network. SNT06 has an internal telephone book and it manages security procedures with caller indentification through support to Call ID functions which are offered by ISDN network.

TECHNICAL FEATURES

l Euro ISDN compatible: NET 3 BRI.

lPPP internal support

lRate Adaption: V110, V120.

lV.42bis data compression.

lAT and V25bis commands in synchronous mode HDLC and asynchronous.

lAutospeed up to 115.2 Kbit/s.

lSynchronous working up to 64 Kbit per channel.

lAsynchronous working up to 115.2 Kbit per channel.

l20 numbers phone book usable in AT compatible and V25bis mode.

lSecurity function with caller identification (Caller ID support).

lCompatible with most popular communication programs.

lUsed as an Hayes compatible modem.

lMultinumber ISDN network service.

lSub-addressing ISDN network service (SUB).

lCaller identity ISDN network service (CLIP).

lLine interface on RJ45 connector for S/T bus.

lV24/V28 and V35 serial interface.

l220 V power supply 50Hz.

lConsumption: 10W.

lTemperature: from -5 to 45°C.

lMaximum humidity 90% non condensing.

lStandalone version dimensions: 190 x 147 x 45 mm.

lRackmount version dimensions: for 4 units rack high and 19" width.

lStandalone version weight: 150 gr.

PRODOTTO	CODICE	DESCRIZIONE
SNT06/1	8D5372	ISDN modem V24/V35 PPP/V110/
		V120/V42bis

VA via Alessandro Volta 39	http://www.digicom.it
digicom S.p.A. -ITALY- 21010 Cardano al Campo	Tel. +39/331/702611 - Fax +39/331/263733 -

SNT06-1 17/02/97