the different Distortion Models. This lets you audition different Distor- tion Models with the current Effect Model. Use the three ring knobs labeled DIST LEVEL, DIST TONE, and DIST GAIN to adjust the distortion settings.
3.Once a distortion model has been selected, you can exit Distortion Model Select mode by pressing the TOE SWITCH again. The Expres- sion Factory will then return to normal operation with both the effect and distortion bypassed. (The MODEL knob now might be on a dif- ferent Effect Model than before it was entered; if so, just turn it back to the desired Effect Model and press the TOE SWITCH to activate it.)
NOTE: Once Distortion Model Select mode has been exited, the Distor- tion Model that was selected will be saved off with the Effect Model that was active when the distortion was selected. This lets you select and save a specific or different Distortion Model to use with each Effect Model.
For a list of Distortion Models, refer to the Distortion and Cabinet Models section.
