Sonic Immersion System Dealer Installation Guide
8.Locate the wire coming from the sub-woofer. This wire is covered with clear insulator. The wire has two conductors. One is copper-colored and the other is silver. Strip approximately ½ inch of insulator from each wire and twist each to form a tight bundle. Connect the copper colored wire to the terminal marked” CH2 (REAR) + LEFT”. Connect the silver colored wire to the terminal marked” CH2 (REAR)
– RIGHT”.
9.Connect red and white preamp input wires to the Line Level Input terminals as follows: connect Channel 1 (flat speaker) to red and white terminals on left, connect Channel 2 (sub- woofer speaker) to red and white terminals on right.
