Sonic Immersion System Dealer Installation Guide
It is important that the ruler or square (see picture on previous page) be kept level and at the top of the recess area while making these measurements.
2.Use the measurements determined in Step 1 and insert them into the following formula:
Distance A = ______ Distance B = _______
A + 1” = Vertical Position (VP) _________
B + ¾” = Horizontal Position (HP)________
3.Now proceed to Cutting Panel Hole for CD Player
Cutting Panel Hole for CD Player Door Assembly
1.Using number obtained for the Vertical Position (VP), measure up from bottom of panel, see below, and mark spot with a fine point marker.
32
