Dimension One Spas Dupree Bay Due to manufacturing tolerances there could be some, Top View

2006 Dupree Bay Specifications Dimension One Spas

2006 Dupree Bay

Architectural Specifications

stereo speaker location

(optional)

5in

[12.69cm]

Optional Wireless stereo

Sub-woofer location

(DOMESTIC ONLY) or location to install optional export SIS

Equipment compartment

7in [18cm]

Recommended location for electrical inlet

11 3/8in [28.82cm]

5in

[12.69cm] 5in [12.70cm]

82in

[209cm]

R17 5/8in [R44.82cm] Shell

R17in

[R43cm] Skirt

6in

[15.23cm] typical for all

support blocks

3in

[7.61cm]

91 1/2in [232.41cm] Shell

82in

[208cm] Pedestal base

89 7/8in [228.35cm] Skirt

Pump location

C

Vent holes

Typical 4 places.

76in [194cm] Pedestal base

TOP VIEW

Control panel

91 1/2in [232.41cm] Shell

3in [7.62cm] Hose bib/

Water drain

31/2in

[8.89cm]

FRONT VIEW

Spa lip

40in

[101.59cm]

36 1/2in [92.71cm]

Pedestal base

Caution:

Due to manufacturing tolerances there could be some

minor differences between the actual spa and the drawing above.

If site planning is critical to such tolerances, be sure to measure your actual spa.

NOTE: Subject to change without notice

1.Engineering specs may differ slightly from brochure.

2.For E-Z lifter installation allow 18” (45.72cm) clearances on the backside of the spa.

3.Alternative cabinets may add significant weight. Ask your dealer for exact details

Doc-1517 Rev - A Rev Date: 01/31/05 Specification, 2006, Dupree Bay Page 2 of 2