Operation
Battery Replacement
(Figure 3)
To replace the battery:
1.Slide battery cover open on the hand held transmitter.
2.Correctly install one (1) 12 Volt (A23) battery in the battery holder.
3.Close the battery cover.
Maintenance
WARNING: Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electric shock or damage to persons.
Light Bulb Replacement
Allow at least 5 minutes for light bulbs and heater to cool off before touching bulbs to avoid accidental burning of skin.
Light bulbs need to be replaced when you notice a dark section of the flame or when the clarity and detail of the log exterior disappears. There are two bulbs under the log set which generate the flames and embers.
Helpful Hints
It is a good idea to replace all
light bulbs at one time if they are close to the end of their rated life. Group replacement will reduce the number of times you need to open the unit to replace light bulbs.
Light Bulb Requirements
Quantity of 2 clear chandelier or candelabra bulbs with a
Replacement:
1.Unplug the unit from power outlet.
2.On the back of the Compact
Fireplace remove the screws from the light access cover
(Figure 4).
10 | www.dimplex.com |