Operation
1.Wall Mounted Switches
This model may be installed so that a wall mounted switch energizes the firebox and flame, (On/Off Switch must be in the ON position). A wall mounted switch may also be used to override the flame image, (On/Off Switch must be in the ON position in coordination with any main power wall mounted switch). A wall mounted switch may also be used
to override the heater/Puri- fireTM option (Mode Selector
Switch must be in the “=” position).
2.Wall Mounted Thermostat
This unit may be installed so that a wall mounted ther- mostat can adjust the heat temperature to your individual requirements. Please refer to thermostat manufacturers operation Instructions. Mode
Selector Switch must be set to “=” for thermostat to control heater/PurifireTM.
3.Wall Mounted Remote Con- trols (WRCPF-KIT)
Dimplex manufactures a optional wall mounted remote
control which allows the user to fully control the fireplace from a central location with the added functionality of a built in thermostat.
Resetting The Tempera- ture Cutoff Switch
The heater on this fireplace is protected with a safety device to prevent overheating. Should the heater overheat, the Overheat indicator will be activated (Fig. 1), and an automatic cutout will turn the heater off and it will not come back on without being reset. It can be reset by switching the On/ Off switch to OFF and waiting 5 minutes before switching it to ON. The overheat cutout will be trig- gered if the filter is dirty. Follow filter maintenance.
CAUTION: If you need to continuously reset the heater, dis- connect power and call Dimplex customer service at
!NOTE: The heater may emit a slight, harmless odor when first used. This odor is a normal con- dition caused by initial heating of internal heater parts and will not occur again.
7
