Operation

Mode Selection Dial (A)

Use this rotary dial to select the function you require

Symbol

Function

Description

 

 

 

Frost Protection

Heater will switch on to provide frost

 

 

 

protection if the room drops below

 

 

 

 

5ºC

 

 

 

 

Heater will maintain a lower

 

 

 

Background (set back)

temperature level for background

 

 

 

 

heating (comfort less 3.5ºC)

 

 

 

 

 

 

 

Comfort

Heater will maintain the temperature

 

 

 

set on the thermostat dial

 

 

 

 

 

 

 

 

 

 

Off

Off

Heater will not function

 

 

 

 

 

 

 

 

Heater will be controlled by a

 

 

 

 

 

 

 

Programme

programming device

 

 

 

 

 

 

 

 

 

 

Note: If the programme function is selected but no programming device is being used, the heater will function in comfort mode

The following Dimplex programmers are available:

Pilot Wire Wall Mounted Controller (2 Zone) – Part no. RX010006 MBS Wall Mounted Programmer (2 Zone) – Part no. RX010007 MBS Slot in Receiving Cassette – Part No. RX9913

MBS Slot in Programming Cassette (Single Zone) – Part no. RX9912 Pilot Wire Programming Cassette (Single Zone) – Part no. RX9911

Function Display (B)

Neon indicators adjacent to the function selector will light to show the mode selected

Setting the Comfort Temperature (C)

Use the thermostat dial (C) to select your desired room temperature. The

markings on the dial are in approximately 3.5ºC increments. The settings are (Frost Protection) and numbers 1-10 (MAX). The quickest way to find your comfort setting is to turn the thermostat dial to the maximum setting. When your ideal comfort level is achieved, turn the thermostat dial down until the thermostat switches off (the neon light will go out) Leave at this setting and the heater will automatically maintain the desired temperature.

Thermostat Light (D)

The neon indicator below the thermostat will light when the heater is operating.

Background (set back)

The background setting is preset at - 3.5ºC this is the amount the room temperature will be allowed to drop when you switch the function selector from comfort to background.

Reverting to comfort mode will automatically cause the temperature to rise to the setting on the thermostat dial.

Advice on Using your Heater

For greatest economy switch the heater to background (setback) if you leave the room for long periods of time or before going to bed.

Do not set the comfort level too high. Even small reductions on the thermostat setting can save a lot of energy.

If you go away for a long period of time select the frost protection setting on the function dial or reduce the thermostat setting to a lower level.

Locking the Thermostat Setting (C)

If necessary you can lock the thermostat dial to a single setting or range. To lock the settings, use a small pair of narrow nosed pliers to pull out the locking pins at the rear of the thermostat dial.

The following settings can be obtained: (see Fig.4)

Single setting – Set thermostat dial to desired setting (eg no.6). Locate one pin directly opposite the setting required

Minimum setting – Set thermostat dial to desired setting (e.g. no.6). Locate one pin opposite the setting required and one hole to the left. (The thermostat will now be adjustable from 6-9 only)

Maximum setting – Set thermostat dial to desired setting (eg no.6).Locate one pin opposite the setting required and one hole to the right. (The thermostat dial will now be adjustable from 1-6 only)

Minimum - maximum setting – (e.g. no.2-4) Locate both pins and space apart until desired range is found

To Lock the Control Cover (E)

A screw is provided to permanently lock the cover in position. It is located on the back of the control box, under the thermostat dial. Remove this and screw through the notch below the lifting tab into the plastic housing. (see Fig.4 above)

Safety

A thermal cut-out will switch off the heater if, for any reason, it overheats. Should the cut-out operate, switch off the mains supply and allow the heater to cool. Once the heater has cooled sufficiently remove the obstruction and switch on the mains supply.

Cleaning

Before cleaning your heater, switch off the heater and allow it to cool. Disconnect the electricity supply to the appliance. The outside can be cleaned by wiping it over with a soft damp cloth and then dried. Do not use abrasive cleaning powders or furniture polish, as this can damage the surface finish.

After Sales Service

Your product is guaranteed for one year from the date of purchase. Within this period, we undertake to repair or exchange this product free of charge (excluding lamps & subject to availability) provided it has been installed and operated in accordance with these instructions.

Your rights under this guarantee are additional to your statutory rights, which in turn are not affected by this guarantee.

Should you require after sales service you should contact our customer services help desk on 0870 727 0101. It would assist us if you can quote the model number, series, date of purchase, and nature of the fault at the time of your call. The customer services help desk will also be able to advise you should you need to purchase any spares.

Please do not return a faulty product to us in the first instance as this may result in loss or damage and delay in providing you with a satisfactory service.

Please retain your receipt as proof of purchase.

This appliance complies with European Safety Standard EN 60335-2-30, and European Standards EN 55014, EN 60555-2 and EN60555-3 for Electromagnetic Compatibility. These standards cover the requirements of the EEC Directives 73/23 and 89/336.

Glen Dimplex UK Ltd

UK Customer Help Line (8am-6pm Mon-Fri; 8:30am-1pm Sat.)

Millbrook House

Customer Services:

Tel: (0870) 727 0101

Grange Drive

 

Fax: (0870) 727 0102

Hedge End

 

E-mail:customer.services@glendimplex.com

Southampton

 

Web-site: www.dimplex.co.uk

SO30 2DF

Republic of Ireland

Tel: 01 842 4833

Page 2
Image 2
Dimplex CAL075 Mode Selection Dial a, Function Display B, Setting the Comfort Temperature C, Thermostat Light D, Safety

CAL200, CAL075, CAL100, CAL150 specifications

Dimplex, a renowned name in electric heating solutions, offers a range of products designed to meet varying heating needs efficiently. Among its offerings, the CAL series, which includes the CAL150, CAL200, CAL075, and CAL100 models, is notable for its modern aesthetics, advanced technologies, and user-friendly features.

The Dimplex CAL series electric heaters are designed to provide effective heating solutions for both residential and commercial spaces. With their sleek design and compact size, these heaters are suitable for any interior, seamlessly blending into existing decor while delivering efficient warmth.

The CAL150 is engineered to heat areas of up to 15 square meters, making it an ideal choice for smaller rooms like bathrooms or offices. It features a rapid heat-up time, ensuring that spaces reach a comfortable temperature quickly. The CAL200, on the other hand, is suited for larger areas, heating spaces up to 20 square meters, and is perfect for living rooms or larger bedrooms.

The CAL075 and CAL100 models cater to even more specific needs. The CAL075 is tailored for very compact spaces, offering the perfect solution for under-desk heating or small utility rooms, while the CAL100 strikes a balance between performance and size, ideal for slightly larger compact areas.

A common feature across the CAL series is the built-in thermostat, which helps maintain consistent room temperature by automatically adjusting the heat output. This feature not only enhances comfort but also promotes energy efficiency by preventing overheating and reducing energy bills. The CAL units also incorporate advanced safety features, including overheat protection and a tip-over switch to ensure safe operation.

The heaters are equipped with Dimplex's innovative fan-assisted technology that aids in rapid heat distribution throughout the room. This ensures that every corner of the room receives warmth, increasing the overall efficiency of the heating solution.

Moreover, the CAL series operates quietly, making it unobtrusive, which is particularly beneficial for multi-functional spaces. With easy installation options and the ability to be mounted on walls, these heaters provide a flexible solution for maximizing floor space.

In summary, Dimplex's CAL150, CAL200, CAL075, and CAL100 electric heaters are versatile, efficient, and stylish heating solutions that cater to a variety of heating needs. Their advanced features, user-friendly design, and focus on safety set them apart in the electric heating market, making them an excellent choice for anyone looking to enhance their indoor environment.