The heater is protected with a safety device to prevent overheating. Should the heater overheat, an automatic cut out will turn the heater off and it will not come back on without being reset. It can be reset by switching the ON/OFF SWITCH to OFF and waiting 5 minutes before switching the unit back on.
CAUTION
If you need to continuously reset the heater, unplug the unit and call Technical Support at
Remote Control
The firepalce is supplied with an integrated on/off remote control.
Note: Ensure that the 3 position switch on the fireplace is set to the remote control setting. To operate, push the ON button to turn the fireplace on, push the OFF button to turn the fireplace off.
Battery Replacement
To replace the battery, slide battery cover open on the hand held transmitter.
Correctly install one 12 volt (A23) battery in the battery holder.
Close the battery cover.
8
