manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
18.All electrical heaters have hot and arching or sparking parts inside. Do not use in areas where gasoline, paint, or flammable liquids are used or stored or where the unit will be exposed to flammable vapors.
19.Do not modify the electric fireplace. Use it only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.
20.Avoid the use of an extension cord. Extension cords may overheat and cause a risk of fire. If you must use an extension cord, the cord shall be No. 16 AWG minimum size and rated not less then 1875 watts.
21.Do not burn wood or other materials in the electric fireplace.
22.Do not strike the fireplace glass.
23.Always use a certified electrician should new circuits or outlets be required.
24.Always use properly grounded, fused and polarized outlets.
25.Disconnect all power supply before performing any cleaning, maintenance or relocation of the unit.
26.When transporting or storing the unit and cord, keep in a dry place, free from excessive vibration and store so as to avoid damage.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NO
SAVE THESE INSTRUCTIONS
NOTE: Procedures and techniques that are considered important enough to emphasize.
CAUTION: Procedures and techniques which, if not carefully followed, will result in damage to the equipment.
WARNING: Procedures and techniques which, if not carefully followed, will expose the user to the risk of fire, serious injury, illness or death.
2
