FAD BALANCE

Press the SEL button four times or twice (EQ Preset Mode) to enter the FAD mode and the screen will display “FAD”.

There are no rear speakers so this setting can stay at default or max out the front fade by turning the volume knob clockwise.

ERROR & RECOVERY

1.In case of any error during the process of radio or disc playing “ERROR” will appear on the screen, you will then have to restart the device.

2.If the sign of “ERROR” remains it is recommended that you press the RESET button with a fine tipped tool through the small hole located in the lower left corner of the stereo chassis.

CD/MP3: BASIC OPERATIONS

INSERT/EJECT: Press the button on the panel, the faceplate will open. Select a disc and insert into the disc holder with the printed side facing up. Press EJECT to take the disc out of the holder. If the disc is not removed from the holder within 10 seconds it will automatically go back inside the holder. When the disc is taken out of the holder the stereo will automatically enter into radio (BAND) mode.

OPEN Button:

Press to open the front panel to access the CD.

PLAY/PAUSE

When a disc is in the disc holder press the PLAY button to play the disc. This function will also work when in the RADIO mode. To pause press the play button, the display will show “ ----“; press the play button again to resume play.

(1)NEXT SEARCH

In the PLAY mode press the button to skip to the next track on the CD/MP3, the

new track number will be displayed in the display. Press for the desired track number.

(2)PREV SEARCH

In the PLAY mode press the

button to skip to the previous track on the CD/MP3,

the previous track number will be displayed in the display. Press

for the desired

track number.

 

 

(3)FAST FORWARD

In the PLAY mode press and hold the button to fast forward through the current

track, then release the button and press the button to stop and play the current track.

(4)REWIND

In the PLAY mode press the button to reverse through the current track.

Release the button and press the button to stop and play the current track.

INT: Browse Programs

Press the INT button and the LCD will display the sign of “INT”, the player will play the introduction (5 seconds) of each track on the disc. Press the INT button again to stop browsing and enter into normal play mode.

10

Page 12
Image 12
Dimplex DFO3607, 7207980300REV00 manual CD/MP3 Basic Operations