MAINTENANCE
WARNING
Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electric shock or damage to persons.
LIGHT BULB REPLACEMENT
Allow at least 5 minutes for light bulbs to cool off before touching bulbs to avoid accidental burning of skin.
Light bulbs need to be replaced when you notice a dark section of the flame or when the clarity and detail of the log exterior disappears. There are three bulbs under the log set which generate the flames and embers.
TOOL REQUIREMENTS
Phillips screwdriver
HELPFUL HINTS
It is a good idea to replace all light bulbs at one time if they are close to the end of their rated life. Group replacement will reduce the number of times you need to open the unit to replace light bulbs.
LOWER LIGHT BULB REQUIREMENTS
Quantity of 3 clear chandelier or candelabra bulbs with an
LOWER BULB REPLACEMENT
1.Open door by pulling the handles.
2.Remove the screw from the logset located in the center of the emberbed and remove the logset from the unit.
3.Locate and examine the bulbs to determine which bulb(s) required replacement.
4.Locate and remove the light bulb(s).
5.Insert new bulb(s).
6.Install the logset into the unit, pushing firmly against the glass. Replace the logset retaining screw into the ember bed.
7.Close the doors.
Figure 4
5
