Manuals / Dimplex / Household Appliance / Indoor Fireplace

Dimplex EWM-SS-BLK, EWM-COPPER manual Wall Mounted Electric Fireplace Installation

Models: EWM-COPPER EWM-SS-BLK

1 15
Download 15 pages 18.14 Kb
Page 5
Image 5

NOTE

A 15amp, 120 volt circuit is required. A dedicated circuit is preferred but not essential in all cases. A dedicated circuit will be required if, after installation, the circuit breaker trips or the fuse blows on a regular basis when the heater is operating. Additional appliances on the same circuit may exceed the current rating of the circuit breaker.

WARNING

Ensure the power cord is not installed so that it is pinched or against a sharp edge and ensure that the power cord is stored or secured to avoid tripping or snagging to reduce the risk of fire, electric shock or injury to persons.

Construction and electrical outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of fire, electric shock and injury to persons.

Do not attempt to wire your own new outlets or circuits. To reduce the risk of fire, electric shock or injury to persons, always use a licensed electrician.

WARNING

Remove the protective film before use. Operation of the unit without complete removal of the protective film may increase the risk of fire and/or product damage or discoloration.

WARNING

The supplied mounting bracket is designed for use with Dimplex wall mounted fireplaces only. Improper use, or use for purposes other than intended, may cause damage or injury.

WALL MOUNTED ELECTRIC FIREPLACE INSTALLATION

WARNING

Failure to install the wall mounted electric fireplace as instructed below may result in damage to the equipment and or may expose the user to the risk of fire, serious injury, illness or death.

WARNING

The wall mounted electric fireplace requires the wall mounting bracket screws to be installed into a minimum of one wall stud. (FIGURE 3 & 4)

1.Select the desired location near an electrical outlet.

2.Ensure the front of the unit when installed is at least 3 feet (0.9m) from combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains.

3.Mount the unit on the wall only with the bottom above an electrical outlet or a minimum of 12” (mounting bracket 34 3/4”) above the floor. Access to the electrical outlet must be maintained. Ensure the installation meets the national and state/provincial electrical

codes.

NOTE: It is recommended that the bottom of the unit not be mounted higher than 30” from the ground (mounting bracket no higher than 52 3/4”).

4.To mount the unit so that the wall outlet is hidden, mount the bracket 19” above the top of the outlet (FIGURE A).

2

Page 4 Page 6
Page 5
Image 5
Dimplex EWM-SS-BLK, EWM-COPPER manual Wall Mounted Electric Fireplace Installation
Page 4 Page 6

EWM-COPPER, EWM-SS-BLK specifications

Dimplex has established itself as a trusted name in the electric heating industry, renowned for its innovative designs and advanced heating technologies. Among its standout offerings are the Dimplex EWM-COPPER and EWM-SS-BLK electric modern wall-mounted heaters, both of which combine stylish aesthetics with efficient heating capabilities to create a perfect blend for contemporary living spaces.

The Dimplex EWM-COPPER is notable for its eye-catching brushed copper finish, which brings a touch of luxury and elegance to any room. This heater is designed with modern homes in mind, featuring a slimline profile that allows for easy installation in tight spaces without sacrificing performance. The EWM-COPPER utilizes advanced heating technology, offering quick heat response times and efficient energy use, making it an ideal choice for larger areas or for enhancing the ambiance of any indoor setting.

On the other hand, the EWM-SS-BLK comes with a sleek stainless steel black finish, providing a minimalist look that complements a variety of décor styles. Its compact design fits seamlessly into both residential and commercial environments while maintaining superior heating efficiency. Both models are equipped with a highly accurate temperature control system, allowing users to set and maintain desired warmth levels easily.

One of the key highlights of both the EWM-COPPER and EWM-SS-BLK is their smart control features. They can be programmed to suit individual schedules and preferences, leading to energy savings and optimized comfort. Additionally, these models feature built-in safety mechanisms, including overheat protection and tip-over switches, ensuring peace of mind during operation.

The Dimplex EWM series is also designed for convenience. They come ready to use with simple installation procedures and are low-maintenance, eliminating the need for traditional fuel sources or extensive upkeep. With their blend of style, technology, and practical benefits, the Dimplex EWM-COPPER and EWM-SS-BLK heaters are ideal choices for consumers looking to elevate their heating solutions while enhancing the aesthetic appeal of their spaces. These innovative units stand out not only for their functionality but also their ability to blend into any modern interior, making them a great addition to contemporary homes.