5.The wall-mounting bracket must be mounted to at least one wall stud (FIGURE 3) or into two wall studs (FIGURE 4)

6.When installing into two studs the wall anchor must be installed into the center location as indicated in FIGURE 3.

7.When installing into one stud, use one of the three center locations as indicated in FIGURE 4. The wall anchors must be installed into the outer most locations as indicated in FIGURE 4.

8.Hold the wall-mounting bracket on the wall and mark the location of ONE of the mounting holes.

9.Install the bubble level onto the top of the wall-mounting bracket. (FIGURE 3 & 4).

10.Adjust the wall-mounting bracket so the bubble on the level is centered between the two black lines.

11.Mark 4 other mounting screw locations on the wall bracket ensuring that the wall bracket stays level.

12.Drill 1/4” holes into the wall on the marked locations where the wall anchors are to be installed. (FIGURE 1)

13.Insert the wall anchors into the 1/4” holes in the wall.

14.Insert the wall anchor screws through the wall bracket and thread into the wall anchors. Tighten the screw. (FIGURE 2)

15.Install the remaining screws into the wall studs as required.

Note: At least one of the mounting screws must be installed into a wall stud.

¼” Hole

Wall Anchor

 

 

¼” Hole in

 

 

wall insert

 

 

plastic

FIGURE 1

Wall Bracket

anchor

 

Screw

 

 

 

FIGURE 2

3

Page 5 Page 7
Page 6
Image 6
Dimplex EWM-COPPER, EWM-SS-BLK manual ¼ Hole Wall Anchor Wall insert Plastic Wall Bracket Screw
Page 5 Page 7

EWM-COPPER, EWM-SS-BLK specifications

Dimplex has established itself as a trusted name in the electric heating industry, renowned for its innovative designs and advanced heating technologies. Among its standout offerings are the Dimplex EWM-COPPER and EWM-SS-BLK electric modern wall-mounted heaters, both of which combine stylish aesthetics with efficient heating capabilities to create a perfect blend for contemporary living spaces.

The Dimplex EWM-COPPER is notable for its eye-catching brushed copper finish, which brings a touch of luxury and elegance to any room. This heater is designed with modern homes in mind, featuring a slimline profile that allows for easy installation in tight spaces without sacrificing performance. The EWM-COPPER utilizes advanced heating technology, offering quick heat response times and efficient energy use, making it an ideal choice for larger areas or for enhancing the ambiance of any indoor setting.

On the other hand, the EWM-SS-BLK comes with a sleek stainless steel black finish, providing a minimalist look that complements a variety of décor styles. Its compact design fits seamlessly into both residential and commercial environments while maintaining superior heating efficiency. Both models are equipped with a highly accurate temperature control system, allowing users to set and maintain desired warmth levels easily.

One of the key highlights of both the EWM-COPPER and EWM-SS-BLK is their smart control features. They can be programmed to suit individual schedules and preferences, leading to energy savings and optimized comfort. Additionally, these models feature built-in safety mechanisms, including overheat protection and tip-over switches, ensuring peace of mind during operation.

The Dimplex EWM series is also designed for convenience. They come ready to use with simple installation procedures and are low-maintenance, eliminating the need for traditional fuel sources or extensive upkeep. With their blend of style, technology, and practical benefits, the Dimplex EWM-COPPER and EWM-SS-BLK heaters are ideal choices for consumers looking to elevate their heating solutions while enhancing the aesthetic appeal of their spaces. These innovative units stand out not only for their functionality but also their ability to blend into any modern interior, making them a great addition to contemporary homes.
Top Page Image Contents