Dimplex EWMC-CC-SS Manual Controls, Maintenance, A. Main Power Switch, B. Manual Selection Switch

Models: EWMC-CC-SS

1 4
Download 4 pages 16.23 Kb
Page 4
Image 4
MANUAL CONTROLS

MANUAL CONTROLS

The corner wall mounted electric fireplace can also be controlled in a similar manner to the remote control with switches located inside the unit (FIGURE 15).

A. Main Power Switch

Main on/off switch, supplies power to the remote control receiving unit. When placed in the on position Level 1 indicator will flash.

B. Manual Selection Switch

Operates the corner wall mounted electric fireplace in the same manner as the remote control transmitter. Pressing the left side of this switch has the same effect as the ON button on the remote control and the right side has the same effect as the OFF button of the remote control. Pressing once to the left activates Level 1, twice activates Level 2, three times activates Level 3. Pressing to the right turns the corner wall mounted electric fireplace off.

MAINTENANCE

WARNING

Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electric shock or damage to persons.

LIGHT BULB REPLACEMENT

Allow at least 5 minutes for light bulbs to cool before touching bulbs to avoid accidental burning of skin.

Light bulbs need to be replaced when you notice a dark section of the flame or when the clarity and detail of the log exterior disappears. There are two bulbs under the log set which generate the flames and embers.

TOOL REQUIREMENTS

Slot screw driver

HELPFUL HINTS

It is a good idea to replace all light bulbs at one time if they are close to the end of their rated life. Group replacement will reduce the number of times you need to open the unit to replace light bulbs.

LOWER LIGHT BULB REQUIREMENTS

Two (2) clear chandelier or candelabra bulbs with an E-12 (small) socket base, 60 watt rating.

LOWER BULB REPLACEMENT

1.Unplug the unit from the outlet.

2.Open latched door.

3.Remove the 3 mounting bracket screws.

4.Set aside mounting bracket.

5.Remove 2 log set screws.

6.Set log set assembly aside.

7.Unscrew the bulb(s) counter clockwise.

8.Insert new bulb(s).

9.Assemble in reverse order.

NOTE

When placing log set back into unit ensure the log set sits in between the 2 vertical mounting flanges.

10. Plug in the corner wall mounted electric fireplace.

10

Page 4
Image 4
Dimplex EWMC-CC-SS Manual Controls, Maintenance, A. Main Power Switch, B. Manual Selection Switch, Light Bulb Replacement