Dimplex EWMC-CC-SS Unit Installation, Securing Decorative Top Panel To Unit, Tools, Figure Figure

Models: EWMC-CC-SS

1 9

Page 9

NOTE

Secure decorative top panel to unit after installing unit to wall.

NOTE

Top panel brackets are left loose by the manufacturer in order to be adjusted to match the engaging holes in the back panel.

TOOLS

Slotted screwdriver

1.Place decorative top panel on top of unit.

2.Open door to achieve access to top panel brackets.

3.Align top panel brackets with holes on back panel.

4.If required, adjust top panel to achieve

a consistent gap above the door.

5.Secure decorative top panel to unit with

(2) screws per bracket. (screws included)

6.Tighten remaining 4 screws on decorative top panel.

FIGURE 9

Image 9

You will need a slotted screwdriver.

Yes, the top panel brackets are left loose by the manufacturer for this purpose.

You will need 2 screws per bracket, with a total of 4 screws for the entire panel.