Dimplex HAW1000N Thermal Safety Cut-out, Procedure for resetting cut-out, Recycling

188

364

674

229

663

Fig. 4

Thermal Safety Cut-out

The thermal cut-out will operate and the power supply to the heating element will be interrupted if ventilation of the heater is impaired.

Before resetting the thermal cut-out, the cause of the impaired ventilation should be established and eliminated.

Procedure for resetting cut-out

1.Disconnect power supply.

2.Remove the guard.

3.Remove the terminal cover to access the thermal cut-out - see Fig. 2.

4.Press the reset tab located in the centre of the cut-out (cut-out clicks when reset) - see ‘x’ in Fig. 2.

5.Re-fit the terminal cover and reconnect power supply.

6.Re-fit the guard.

If the cut-out continues to operate intermittently, the heater should be switched off and a service agent contacted.

Cleaning and User Maintenance

WARNING: DISCONNECT SUPPLY before carrying out maintenance.

The heater should be subject to a regular maintenance schedule with the following actions as a minimum:

·Check that the heater surfaces are clean and free from any deposits. The heater can be cleaned by wiping with a damp cloth. Neither abrasive cleaning powders nor furniture polish should be used.

·The internal wiring shall be clean and dry, with no apparent deterioration of the wiring insulation.

·All connections shall be tight, without signs of overheating.

Recycling

For electrical products sold within the European Community. At the end of the electrical products useful life it should not be disposed of with household waste.

Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice in your country.

After Sales Service

Your product is guaranteed for one year from the date of purchase.

Within this period, we undertake to repair or exchange this product free of charge (excluding element & subject to availability) provided it has been installed and operated in accordance with these instructions. Your rights under this guarantee are additional to your statutory rights, which in turn are not affected by this guarantee.

Should you require after sales service you should contact our customer services help desk on 0845 600 5111 It would assist us if you can quote the model number, series, date of purchase, and nature of the fault at the time of your call. The customer services help desk will also be able to advise you

should you need to purchase any spares.

Please do not return a faulty product to us in the first instance as this may result in loss or damage and delay in providing you with a satisfactory service. Please retain your receipt as proof of purchase.

The product complies with the European Safety Standards BS EN60079 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and EN60555-3 which cover the essential requirements of EEC Directives 73/23 and 89/336

Dimplex UK Ltd.

Millbrook House

Grange Drive

Hedge End

Southampton

Hampshire. SO30 2DF

UK customer help line 8.00am–5.00pm Mon-Fri and 8:30am-1.00pm Sat (October-March)

Technical Services: Tel. 0845 600 5111 Fax. 01489 773053

e-mail technical.services@dimplex.co.uk

Republic of Ireland Tel. 01 8424833

[c] Dimplex UK Limited

All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Dimplex UK Limited.