Dimplex SI 24TE SI 37TE manual Baseline Unit, Accessories, Transport, Connecting Flanges

Models: SI 24TE SI 37TE

1 21
Download 21 pages 2.59 Kb
Page 4
Image 4

5

3 Baseline Unit

The baseline unit consists of a heat pump, ready for connection, for indoor installation, complete with sheet metal cabinet, control box and integrated controller. The refrigeration cycle contains the refrigerant R404A. Refrigerant R404A is CFC-free, non-ozone depleting and non-combustible.

All components required for the operation of the heat pump are located in the control box. A sensor for the external wall temper- ature including mounting hardware as well as a strainer are sup- plied with the heat pump. The voltage supply for the load and control current must be provided by the customer.

The control wire of the brine pump (to be provided by the cus- tomer) is to be connected to the control box. When so doing, a motor protecting device is to be installed, if required.

The collector including the brine manifold must be provided by the customer.

4 Accessories

4.1Connecting Flanges

The use of flat-sealing connecting flanges allows the unit, as an option, to be connected by means of flanges.

5 Transport

For the transport by means of a hand truck or boiler trolley, po- sition the latter under the front end of the unit below the transport security device.

For transport on a level surface, the unit can be lifted from the rear or from the front by means of a lift truck or forklift. In this case, the transport securing device is not imperative.

English











1)Control

2)Evaporator

3)Condenser

4)Compressor

5)Transport securing devices

6)Filter drier

ƒ

ƒ



ATTENTION!

The heat pump must not be tilted more than max. 45° (in either direction).

5HPRYHVFUHZLQ

WUDQVSRUWORFN

After the transport, the transport securing device is to be re- moved on either side at the bottom of the unit.

ATTENTION!

The transport securing device is to be removed prior to commissioning.

To remove the panelling, open the individual covers by unscrew- ing the respective turn-lock fasteners and then gently tilting the covers away from the device. Then lift them up out of the mount- ings.

www.dimplex.de

E-3

Page 4
Image 4
Dimplex SI 24TE SI 37TE manual Baseline Unit, Accessories, Transport, Connecting Flanges

SI 24TE SI 37TE specifications

The Dimplex SI 24TE and SI 37TE are high-efficiency electric heating solutions designed to meet diverse heating needs in residential and commercial spaces. With their innovative features and advanced technologies, these models stand out in the market for their reliability and performance.

At the core of both models is Dimplex's commitment to energy efficiency. The SI 24TE and SI 37TE are equipped with state-of-the-art heating elements that ensure rapid warmth, effectively removing cold spots in any room. This is particularly advantageous in colder climates, where heating demands can be significant. The units employ a fan-assisted heating system which promotes even heat distribution, making them ideal for larger spaces.

One of the main features of the Dimplex SI 24TE is its precision thermostat, which allows users to set and maintain their desired temperature with accuracy. This helps in preserving energy while ensuring optimal comfort. The SI 37TE, on the other hand, offers an enhanced capacity for larger areas, delivering impressive power output tailored for extensive usage.

Both models incorporate advanced digital controls that make operation simple and user-friendly. The intuitive interface enables users to quickly adjust settings, such as timers and temperature ranges, ensuring personalized comfort at all times. Additionally, the units feature a programmable timer, allowing users to automate their heating schedules and further improve energy savings.

Another characteristic that distinguishes these models is their sleek and modern design. With a contemporary aesthetic, the Dimplex SI 24TE and SI 37TE can seamlessly integrate into various decor styles, enhancing the visual appeal of any space. The compact build helps maximize floor space, making them suitable for both wall-mounting and free-standing applications.

Safety is paramount, and Dimplex ensures that both models come equipped with essential safety features. With built-in overheat protection and a tip-over switch, users can have peace of mind while enjoying the warmth provided by their heaters.

In summary, the Dimplex SI 24TE and SI 37TE are exemplary electric heating solutions, characterized by energy efficiency, user-friendly controls, stylish design, and essential safety features. These models are perfect for anyone seeking reliable heating solutions that combine performance with convenience, making them a smart investment for a comfortable indoor environment all year round.