FRONT PANEL CONNECTIONS/STATUS LED
1.RCA Output Jacks - These pass through RCA jacks can be used to send a signal to a second amplifier.
2.RCA Input Jacks - Accepts line level outputs from head units or signal processors at voltages between 250 mV and 8 volts.
3.Speaker Load Select - Set 1 or 2/4 ohm to match the stereo load impedance of the system.
4.Fan Port - connection port for
connecting external, 12v DC brush- less fan.
5.ESP Port - For connecting the ampli- fier to
6.Remote Level - Optional accessory which allows the level to be adjusted remotely (usually located for control by the vehicle’s driver).
FIGURE 1—AMPLIFIER CONNECTIONS 1200T FRONT
1 | 2 | 3 | 4 | 5 | 6 |
OUTPUT INPUT
R
L
SPEAKER LOAD
SELECT
2/4 | - + | ESP |
1 | FAN | PORT |
REMOTE
LEVEL
© 2004 Directed Electronics, Inc | 7 |