Directed Electronics 2.2 manual Runtime reset, Aux, Sensor Bypass, Valet mode

Runtime reset

Command:	Press	one-time and then	.
Notes:	Re-starts the remote start runtime counter if remote start is
	active.
Aux 1
Command:	Press	one time and then press		AUX .
Notes:	This is an optional feature. See your sales rep/installer
	for details.
Aux 2
Command:	Press	two times and then press		AUX .
Notes:	This is an optional feature. See your sales rep/installer
	for details.
Aux 3
Command:	Press	three times and then press		AUX .
Notes:	This is an optional feature. See your sales rep/installer
	for details.
Sensor Bypass
Command:	Press	two- times and then
Notes:	Available when armed only: bypasses warn triggers.
	Send again to bypass Warn & Full Trigger; Send again

to turn bypass off and monitor sensors normally. For more information, see Modified Arming Modes.

Valet mode

Command: Press two-times and then .

16 © 2008 Directed Electronics. All rights reserved.