35
© 2008 Directed Electronics. All rights reserved.
Zone Description Dealer installed options
1 Trunk Pin
2 Instant trigger: a heavier impact
detected by the shock sensor
3 Door switch trigger
4Instant trigger: For optional
sensors
5 Ignition trigger
6 Hood Pin
➤ Interpreting zone diagnostics
Warn Away responses are not reported by arming or disarming diag-
nostics. If you receive a Bypass notification when ar ming or a Tamper
Alert notification when disarming, look at the LED.
Active or triggered zones will be indicated by a pattern of blinks by
the LED.

For example:

If zone 3 was active or triggered, the LED will blink three
times with a two-second pause. Then it will blink three times again, and
repeat until the ignition is turned on.
➤ Nuisance prevention® circuitry
Your system has Directed’s Nuisance Prevention® Circuitry (NPC). It
prevents annoying repetitive trigger sequences due to faulty door pin
switches or environmental conditions such as thunder, jackhammers,
airport noise, etc.

For example:

If the alarm triggers three times within a 60-minute period
and each time the same sensor or switch triggers the alarm, NPC will