S p e a k e r C o n n e c t i o n s
Follow these simple instructions and refer to the diagram below to make your speaker connections:
•Using at least 16 gauge wire, run wire from the speakers to the amplifier(s) using the same precautions that you followed for running the power, ground, and remote wires
•Cut off excess wire
•Use wire strippers to strip 1/4 inch of insulation at the end of the wires
•Attach the speaker wires to the amplifier’s POWERLOCK connector and plug it in
Speaker PowerLock Connector 
Right Speaker negative
Right Speaker positive 
Remote turn on 
Left Speaker positive 
Left Speaker negative 
Powerlock connector
