TOP PANEL CONTROLS
1.Input Gain Adjustment - Controls amplifier sensitivity and is used to match the input level of the ampli- fier to the output level of the signal source.
2.Crossover Selection Switch - Controls the type of filter for the onboard active crossover. FLAT does not attenuate any frequencies and is for full range speaker systems. HPF attenuates low frequencies and
FIGURE 3—AMPLIFIER CONTROLS TOP
is used for mid range speakers and tweeters. LPF attenuates high frequencies and is used for subwoofers speakers.
3.Crossover Frequency Adjustment - Adjusts the crossover point for the on board active crossover.
4.Variable Bass EQ - Adds 0 to12db of additional boost to the speaker output when active.
1 | 2 | 3 | 4 |
10 | © 2002 Directed Electronics, Inc |
|
