✂
Quick reference guide
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
To arm the system
■To arm the system, press the button on your transmitter. When the system arms, your will hear a short horn honk, see the parking lights
flash once, and the doors will lock.
To disarm the system
■To disarm the system, press the button on your transmitter. You will hear two short horn honks, the parking lights flash twice, and the doors
unlock.
Disarming without a transmitter
■Turn on the ignition. Press the integrated LED/Valet button the pro- grammed number of times within 10 seconds. The system should now disarm. If it does not, you may have waited too long. Turn the ignition off and on and try again.
To enter or exit Valet Mode
■Turn ignition to “run” position, then turn to “off” position. Press and release the integrated LED/Valet button within 10 seconds. The status LED will light solid if you are entering Valet Mode, and it will go out if you are exiting Valet Mode.
Remote Valet
■Open any door. Press the button on your transmitter. Within one
second, press the button on your transmitter. Within one second,
press the button on your transmitter again. The status LED will stay on if you have entered Valet Mode, and it will go out when exiting Valet
Mode.
Panic Mode
■To enter Panic mode, press the button on your transmitter. The horn will sound and the lights will flash for
press the , , or button on your transmitter.
✂
© 2008 Directed Electronics All rights reserved | 21 |