Valet mode
You can prevent your system from arming, by using Valet Mode. This is very useful when washing the vehicle or having it serviced. In Valet Mode, the system will not arm, even with the transmitter, but all con- venience functions (door locks, trunk release, etc.) will work normally.
To enter or exit Valet Mode with the integrated LED/Valet but-
ton:
Turn ignition to “on” position, then turn to “off” position. Press and release the integrated
LED/Valet button within 10 sec- onds. The status LED will light
steady if you have entered Valet Mode. To exit Valet Mode, repeat the steps above. The LED will turn off when exiting Valet Mode.
remote valet
Remote Valet is a convenient feature that makes bypassing the securi- ty system easier. This feature makes it possible to exit or enter Valet Mode using your factory keyless transmitter.
1.Open any door.
2.Press 
on the transmitter.
3.Press 
on the transmitter.
4.Press 
on the transmitter.
The status LED will stay on if you have entered Valet Mode, and it will go out if you exited Valet Mode.
© 2008 Directed Electronics All rights reserved | 9 |
