SPECIFICATIONS
Viper model | 300.1 |
|
| ||
RMS continuous power driven into 4 ohms from | 200 watts | |
20 to 250 Hz with less than 0.4% Total |
|
|
Harmonic Distortion @ 14.4 VDC |
|
|
RMS continuous power driven into 2 ohms | 300 watts | |
from 20 to 250Hz with less than 0.6% Total |
|
|
Harmonic Distortion @ 14.4 VDC |
|
|
Dynamic power rating | 350 watts | |
minimum load |
|
|
| Greater than 80 dB | |
Frequency Response |
| |
Damping Factor | 50 (typical) | |
Crossover | ||
| variable from 30 to 250 Hz | |
Bass Equalization | Switchable +8 dB, | |
| centered at 40Hz | |
Input Impedance | 20K ohms | |
Input Sensitivity | Variable from 150 mV to 8 volt | |
Output Impedance | 2 to 4 ohms | |
Supply Voltage | 10 to 16 VDC | |
Fusing and Power | 25A | |
Minimum Cable Requirements (AWG) | #12 |
|
(Per amp, trunk mounted) |
|
|
© 2002 Directed Electronics, Inc | 13 |