Directed Electronics HVM702 installation manual Menu Adjustments

Press the SEL button on the remote control to the mute the audio, press again to restore audio.

NOTE: If the MENU button on the remote has been pressed prior to pressing the SEL button, the SEL button now selects a menu item to be adjusted.

MENU (ADJUSTMENTS)

1. Press the MENU button on the remote to display the following four groups:

VIDEO	AUDIO	MODE	DISP
Bright	Volume	Full	PAL/NT
Color	Bass	4:3	UP/DN
Tint	Mute	Wide	LET/RIT
Dimmer	H/P
Reset

2.Use the S/T buttons on the remote to highlight the VIDEO, AUDIO, MODE, or DISP groups.

3.Press the SEL button to select the desired group. Use the S/T buttons to select the desired setting to change.

4.Use the W/X buttons to change the setting.

4.If no entry or action is taken within approximately 8-seconds the Menu will disappear and any changes are saved. Pressing the MENU button will also exit the adjustments screen.

VIDEO

BRIGHT(ness): 0–15

COLOR: 0–15

TINT: 0–15

DIMMER: ON–OFF (In the ON position the LCD screen is dimmed, which offers better veiwing at night or in dimly lighted envirorments.)

RESET: YES–NO (This resets the unit back to the factory default settings for the above adjustments.)

© 2004 Directed Electronics, Inc. 9