© 2005 Directed Electronics, Inc.

BBAATTTTEERRYY RREEPPLLAACCEEMMEENNTT

NNOOTTEE::Before using remote after installation, remove the battery plastic protective slip.
1. Move the small latch to the right and slide out the battery holder.
2. Remove old battery and replace it with a new battery (CR2025) with the positive “+” sign facing
as shown above.
3. Push battery holder back into its compartment until it is locked.

PPRREECCAAUUTTIIOONNSS

1. Properly dispose of used battery.
2. Do not misuse battery by shorting the positive “+” and negative “-” terminal or put it into fire.
Overheating may cause the battery to explode and cause a fire hazard.
3. If the remote is not to be used for a long period, remove the battery from the remote to prevent
damage from battery leakage.
4. To avoid accidents, prevent children from playing with the battery.
LLooaaddiinngg aanndd UUnnllooaaddiinngg DDiissccss
You can use single side and dual layer DVDs, VCDs, CD-audio and CD-R compatible 12cm discs with
this system.

LLOOAADDIINNGG DDIISSCC

1. Press OPEN at the upper right corner to open the door.
2. Load with the recorded side (the shiny side) facing up. With double-sided discs, load with the
Remote Controller
Battery
Battery Holder
Latch
+ side
18