Echo Transmitter Installation
When you have confirmed that the SIRIUS home antenna is aimed properly, and has a good SIRIUS signal, you are ready to install the Echo Transmitter. The location of the Echo Transmitter is important for getting the best performance out of your SIRIUS Echo Signal Repeater System. Avoid locating the Echo Transmitter near any of the following items which could cause degradation of the wireless signal:
-Microwave Ovens
-Electric Ranges
-Window Air Conditioners
-Large Appliances
-Cordless phones
-Electrical Fuse or Breaker Panels
-Other wireless transmitters such as those for Wireless Video or Wireless Headphones or the SIRIUS Tuner in the SIRIUS Conductor System.
Consider where you will be using the Echo Antenna(s). Locate the Echo Transmitter within 75
feet of the farthest Echo Antenna, but no closer than 10 feet to the closest Echo Antenna. For
To install the Echo Transmitter,
1Connect the cable from the SIRIUS home an- tenna to the antenna connector on the rear of the Echo Transmitter.
2Connect the AC Adapter to the power connec- tion on the rear of the Echo Transmitter, and plug the AC Adapter in to a standard 110 volt AC outlet.
3Raise the black plastic antenna to an upright vertical position, so that it is pointing straight up.
4Ensure that all the 3 LEDs on the front of the Echo Transmitter are lit up.
This completes the Echo Transmitter installation.
14
© Directed Electronics, all rights reserved.
